@CQQKI3Z wrote:
Im trying to get a breadboard view for the Elegoo 2.8" Touch TFT. I’ve created a SVG-file via Inkscape but it always centers a huge bulk behind the part where i drew the connectors (which basically it refers as a huge copper part/ connector). Also the image always gets deleted after trying to add it into a sketch
anyone knows how i can fix this?
Thanks
Posts: 8
Participants: 3
@Parsa_Bakhtiari wrote:
Hi guys
yesterday I install last version of Fritzing in Widows 7 x64 bit but I can`t get any update and when I try to Update manually I got this message :
at the first i thought this error might be for location of fritzing folder but I change the location of folder and it`s not work again .
so would you help me to fix this problem ? I Seriously need to install new update
Posts: 2
Participants: 2
@4bears wrote:
is there a generic part I could use for 8 simple pads?
The part is a Mpxv5004dp but it seams simple but I can’t find it.
Posts: 2
Participants: 2
@KevinNL1999 wrote:
Hi, I would like to use an SVG image as a logo for my PCB. I already created the SVG (on https://www.figma.com) and when I open the SVG file in the browser (Chrome) I can see the image correctly.
However, when I import the same SVG image on my PCB as a ‘Silkscreen Image’ on the top layer of my PCB the only thing I can see is a blacked out image
When I move the SVG to the bottom silkscreen of the PCB, I can see the image slightly. This is the correct image, but on the bottom silkscreen.
Is there an extra step I have to make to load the SVG correctly? Do I need to convert my SVG to a PNG file? If so, how can I keep the image quality?
Thanks in advance!
Posts: 2
Participants: 2
@KevinNL1999 wrote:
Hi, I’m looking for a ER14250 battery holder for my PCB for this kind of battery:
This is what the battery holder looks like:
Datasheet for this battery holder:
Maybe this battery holder already exists, but I couldn’t find it in the existing Fritzing parts. I also searched the internet to see if people already made this, but unfortunately without success
Posts: 1
Participants: 1
@FRITZME wrote:
STEP 1. GO TO FRITZING WEBSITE AND HOPE TO GOD THAT SOMEONE CAN HELP
STEP 2.NO ONE CAN HELP
STEP 3. GO INTO FRITZING…CRASHES MF
STEP 4.CONTINUE STEP 3 FOR 9 ******* YEARS
STEP 5. CLICK BREADBOARD. THEN RESTART STEP 3
STEP 6. GET INTO BREADBOARD AND HAVE IT DO WHAT EVERY THE **** IT WANTS.ITS NOT YOUR WORLD NOW ITS FRITZINGS.
STEP 7. COMPLAIN AND NO ONE ANSWERS. FUNNY HOW THE WORLD WORKS EH. BRING YOUR VIRGIN ASS OUT OF THE HOUSE AND STOP DEVELOPING THIS SHIT ASS PROGRAM YOU BUNCH OF PORCH MONKEYS.fffffffff
Posts: 2
Participants: 2
@joshbg2k wrote:
Hi folks,
Here’s an issue I’ve run into. I have a decoupling capacitor between the main power source (component A) and power/ground of the component I’m powering (component B). When I run the ground fill process, the ground pin on component B connects directly to the ground fill and not the capacitor. The grounds on components A and B are identified as GND in the ground fill seeds list, so toggling it turns all of them on or off.
What I think I need to do is make sure that ground from the power source hits the capacitor before ground on component B. But how can I go about this? Thank you!
Posts: 1
Participants: 1
@snehaagarwal1 wrote:
Vasthi Instruments are global leaders in manufacturing of Water analyzer and have been supplying instruments to customers worldwide.
Posts: 1
Participants: 1
@Alexosakuma wrote:
For my project I created this two SMD optoisolators. Attention: No breadboard included, beacuase it is SMD).
Vishay SMD-8 (VO4661).fzpz (8.0 KB)
Vishay SMD-8 (6N137).fzpz (7.7 KB)
Posts: 1
Participants: 1
@djswirl wrote:
Hi All
I quite new to all this. I’m working on a project were I need to place 24 x WS2812b LEDs in a circle on custom PCB. Fritzing does not have the capability to lay this out correctly and accurately so I’ve make a custom part using CorelDraw. I have put in the copper and silkscreen layers, however I need a mask
What I need to end up with all the tracks having a mask and only the pads exposed, what I getting is ALL copper exposed.
So how do I add a copper mask, what slayer names are used?
Thanks
Brian
Posts: 13
Participants: 3
@CV_Wonder wrote:
Hello everyone,
Is there anybody out there who happens to have fritzing part designed for a surface mount 3.5mm mono jack of any type? I haven’t been able to find one and am not versed at all at creating parts from scratch.
Thank you!
Posts: 11
Participants: 2
@rosest962500 wrote:
Samsung is an incredible product. However, there is one thing in my mind, therefore, I want to share issues related to Samsung printer. Sometimes the issue may occur while printing an important document. Recover the issue with just one click, follow this quick fix guide samsung printer error code u1-2320 and error easily. I had personally checked and had applied the steps to recover my printer and it is truly incredible.
Posts: 2
Participants: 2
@Noiseum wrote:
Hi, Its my first time using FRITZING and i can’t find the normal or generic IC’s, for example: SN74LS08,00,86,32… etc, the basic ic, and SN74LS47N, SN74LS83 please halp frens, humm any package, library, file or tuto for download please?
Thanks
Posts: 3
Participants: 3
@CV_Wonder wrote:
Hello everyone,
Is there anybody out there who happens to have fritzing part designed for a surface mount 3.5mm mono jack of any type? I haven’t been able to find one and am not versed at all at creating parts from scratch.
Thank you!
Posts: 11
Participants: 2
@rs456 wrote:
hi there could someone please make me a .fzz file of the RYLR896 by reyax please all the dimensions and such are here: http://reyax.com.cn/wp-content/uploads/2017/09/RYLR896_EN.pdf
need for a university project
Posts: 4
Participants: 3
@nguyenbatien wrote:
HI, i want to looking for E3F-DS30C4 Omron sensor, but the library my fritzing dont have e3f ds30c34 , please help me.
Posts: 1
Participants: 1
@nguyenbatien wrote:
please send to me link the download part of E3F-DS30C4 Omron sensor, thank all member in forum
Posts: 1
Participants: 1
@nguyenbatien wrote:
please help me download library power supply 12V-5, because my fritzing dont have it
Posts: 1
Participants: 1
