January 24, 2019, 11:29 am
@Mekatronik45 wrote:
Hi I’m new to Arduino, I bought a slate training kit and nextion 2.4 inch HMI 4MB. I am looking at a few examples of the projects that I couldn’t connect with the RX TX with the screen Arduino, looking at them, I liked the nextion screen, I am looking for a friend who can give me a sample project with Arundino UNO and nextion 2.4. LED lamp with a button on the screen, running Arduino LED lamp, LED lamp on the screen when the nextion can not see the information that worked
Posts: 1
Participants: 1
Read full topic
↧
January 24, 2019, 4:50 pm
@Lineaxe wrote:
In 0.93 I am finding a strange phenomena on the font sizes loading into Fritzing schematic incorrectly from an inkspace svg that I have saved. They come out as huge size in Fritzing’s schematic view, I deleted the original ones and even my newly created fonts were huge.
Seems opposite to Fritzing setting a size to zero as described in another post here. I will try removing px from all the font sizes to see if that helps. I guess this version has been around since 2016 … Testing being done found font size of 166.9923489234px , ugh … replaced with just 166 and the fonts are now back to normal.
ps … I find ATOM with a few nice addons makes a great editor for this kind of stuff ![:slight_smile:]( ":slight_smile:")
I
Posts: 5
Participants: 2
Read full topic
↧
↧
January 25, 2019, 6:33 am
@hardmod wrote:
Hi everybody,
I’ve got a very specific question.
I’ve got a blog running with a CC Attribution-NonCommercial-ShareAlike 4.0 license (“if not statet otherwise”).
I want to publish circuits and in the FAQ I learned “First of all, you can do whatever you want with them.”
But as the exported images are watermarked (and of course the watermark will stay), I guess I have to name another license for them.
Am I right here? And which license and owner do I have to mention?
Thanks!
Posts: 1
Participants: 1
Read full topic
↧
January 25, 2019, 7:15 am
@airkei wrote:
Today I successful installed the latest Fritzing Version file, fritzing-0.9.3b.linux.AMD64, onto a Rapsbian Raspberry pi 3 B+ computer which I bought in this month, Jan/2019, by " sudo apt-get install fritzing ". But the fritzing did not start and stopped if I tried again.
I can see the following message after entering “fritzing ,return”,
“pi@raspberrypi:~ $ fritzing
libEGL warning: DRI2: failed to authenticate qt5ct: using qt5ct plugin inotify_add_watch(”/home/pi/.config/qt5ct") failed: “No such file or directory”
Segmentation fault".
Can someone please let me know how to start the program correctly ?
Posts: 2
Participants: 2
Read full topic
↧
January 26, 2019, 5:37 pm
@RaonMaru wrote:
![image]()
While using Schematic. I realized i need more space for routing.
So i wanted to move lines drawn before…
But there was no way to move multiple bandpoints.
I found way* to move each line but there’s too many lines.
Can i have suggestions about this problem?
- Press Alt and move lines -> doesn’t snaps on grid.
Posts: 1
Participants: 1
Read full topic
↧
↧
January 26, 2019, 5:42 pm
@RaonMaru wrote:
Steps I took that resulted in the problem:
Drag Arduino Mega 2560(Rev3) to the schematic view.
the digital Pin 2,3 is swapped.
…
What I expected should have happened instead:
re align digital ports.
…
My version of Fritzing and my operating system:
Well… there’s noting to update. i don’t know how to check version but it looks lastest version.
Windows 10
…
Please also attach any files that help explaining this problem
![image]()
pic looks cute. lol
have a nice day
Posts: 3
Participants: 3
Read full topic
↧
January 27, 2019, 1:42 am
↧
January 27, 2019, 1:44 am
↧
January 27, 2019, 6:11 am
@Lineaxe wrote:
Well I get an obsolete part error with new part I created. I want to change that status somewhere in the XML I imagine. I guess I started with an obsolete part perhaps and still got it after I created a new part. It’s a simple part and shouldn’t be too much to fix when I find out why this is going on.
Posts: 2
Participants: 2
Read full topic
↧
↧
January 27, 2019, 11:38 am
@ChristianLJ wrote:
I’m having a hard time create a custom PCB layout using Inkscape.
When i am opening the .svg it in Fritzing it tells me that there’s no outline which i can confirm when checking the gerber file.
I’ve attached the layout with dimensions. Can anyone help me, design it?
Link to image: https://i.imgur.com/YvNbkt7.jpg
Posts: 2
Participants: 2
Read full topic
↧
January 28, 2019, 6:13 am
@lvincek wrote:
Mouser has a program that converts its products into library files for different PCB CAD programs (Eagle is supported, for instance). I asked if they would support Fritzing. They said “yes”, but it would helpful if someone from Fritzing would work with them to set it up. Does anyone know if that person exists, and how I can find them.
Posts: 2
Participants: 2
Read full topic
↧
January 29, 2019, 2:18 am
@wilckaudio wrote:
Hi,
I´am new to Fritzing and have some questions.
I would like to do a PCB for a synth module.
How can I get the power connections (+12V, -12V and Ground) in the schematic and on the pcb, so that they get connected on the pcb automatically?
I also have a problem with connections for cables going to the plate of the synth module.
How do I get single “connection”-spots into the schematic and the PCB?
Thanks for helping!
Posts: 1
Participants: 1
Read full topic
↧
January 29, 2019, 12:52 pm
@vanepp wrote:
Below is an improvement of the current STM32F103C8T6 blue pill part in core. The present part lacks pcb (and in fact is an SMD part at present) and the pin numbering was out of order. It lacked a description, and had various other problems such as non standard colors and stroke widths. I changed the labels in breadboard to match one of the generic blue pill boards from Ebay and changed the name on the pins to match the board and the description to be the full list of possible pin parameters from the pinout diagram at the blue pill site. PCB now has the 40 I/O connectors suitable for .1 headers (it used to be the SMD CPU chip which isn’t useful in this case). The reason for this post is to give folks that are using the part a chance to object to me asking for it to be changed in core as this part will likely require rerunning the traces in schematic because it has changed (I think for the better, but you may disagree). This is set as a new part so you can load it beside the one currently in core (which can be found by searching for “STM32F103C8T6” in parts search, I added blue pill as a tag so that should find it in future too). Please have a look and comment here if you wish.
STM32F103C8T6.fzpz (51.5 KB)
Peter
Posts: 1
Participants: 1
Read full topic
↧
↧
January 29, 2019, 3:08 pm
@mac5y4 wrote:
Hi I’ve tried several times to install fritzing on my Ubuntu set up using
sudo apt install fritzing fritzing-data fritzing-parts
every time I get
(Sorry, we have a problem with the swapping mechanism. Fritzing still works, but you won’t be able to change parts properties.) when i press OK I get Unable to find the following 142 part(s): and a list of parts
ie
‘PadModuleID’ at ‘:/resources/parts/core/pad.fzp’
When I close that wimdow Fritzing load’s up but there are no parts only perfboard
I have installed it before on an Ubuntu 12 setup with no problem
any help would be appreciated
thanks
Posts: 2
Participants: 2
Read full topic
↧
January 30, 2019, 2:37 am
↧
January 30, 2019, 11:28 am
@zneb wrote:
I have tried every example I can find ,but they all load properly .I get no print out with button push. Using ELEGOO uno R3 and this is the last sketch I tried.
#include <IRremote.h>
#include <IRremoteInt.h>
#include <IRremote.h>
int RECV_PIN = 11;
IRrecv irrecv(RECV_PIN);
decode_results results;
void setup()
{
Serial.begin(9600);
irrecv.enableIRIn(); // Start the receiver
}
void loop()
{
if (irrecv.decode(&results))
{
Serial.println(results.value, HEX);
irrecv.resume(); // Receive the next value
}
}
Posts: 6
Participants: 2
Read full topic
↧
January 31, 2019, 11:10 pm
@vanepp wrote:
As was requested in wishlist, a part for the Udoo Neo. Breadboard and schematic only (because PCB doesn’t look useful or practical).
UDOO_Neo.fzpz (42.4 KB)
Peter
Posts: 1
Participants: 1
Read full topic
↧
↧
January 31, 2019, 11:51 pm
@JorgeP wrote:
This is my first part and post. I created it because I could not find one when I searched for it.
1.44-SPI-TFT-Graphics-Display-128x128.fzpz (6.0 KB)
![TFT-Color-Graphic-LCD-144-128x128_SPI-01]()
It includes a link to the sellers page on amazon.
These are nice displays but slow with graphics on an UNO, they recommend only text with the UNO boards due to memory. I tested the graphics on the UNO (Official) and the Elegoo variant UNO boards, both function the same.
Enjoy,
Jorge
Posts: 1
Participants: 1
Read full topic
↧
February 2, 2019, 1:27 am
@RichBoud wrote:
This is my first part, so I would appreciate feedback on whether I got it right and how I can improve.PN7462.fzpz (35.2 KB)
Posts: 1
Participants: 1
Read full topic
↧
February 2, 2019, 10:25 am
↧
