Hi,
I found several molex 8 pin connectors in here but unfortunately, distance between rows are 4.2mm instead of 5.5mm with my aliexpress clone
Tried to move the pins from a previous one but really can’t use the editor properly.
Heres the details of mine
1 post - 1 participant
Hi!
I would like to know where a can find the .fzpz file of the battery in the following photo:
If there isn’t something like this yet, could someone create this part please?
Thanks!
3 posts - 2 participants
I need this component for a college project, can anyone help me, please?
15A Single DC Motor Driver wiki-DFRobot
1 post - 1 participant
Hello… I’ve designed my PCB board and I’m ready to have it manufactured. Can you confirm if I’ll receive an Arduino header or an actual Arduino board?
From the Arduino parts list, I selected a board, (Mega ADK). I designed my PCB but I need to know if I’ll receive a header printed on my PCB board or an Arduino Mega ADK printed on my PCB board.
Thank you,
Lonnie
1 post - 1 participant
I am a 4th year ECE student here in the Philippines. Can anybody help me with my report about Silicon Control Rectifier? Thanks ahead…
1 post - 1 participant
Need parts file for TB6560 Stepper Driver board and for DC to DC Convertor with LED Display.
Thanks for any help !
1 post - 1 participant
This may be a stupid question, but has anyone made a part that just represents a 120VAC wall outlet? Or is it not possible to assume a non-battery power source?
Pretty sure I saw one that someone had made for a custom brewery schematic, when I googled it, but they didn’t provide the Fritzing part.
Still working out how to make new parts from custom ones, or else I’m sure I’d have my answer. Would love to see what may already be out there… for convenience.
Apologies if this isn’t in the right post-category
1 post - 1 participant
Hello, I have searched the internet and unfortunately come up empty handed.
There used to be an old Google Drive link that Cytron provided which contained the Fritzing files, however, it doesn’t work anymore.
May I ask if anyone knows where to find the file for a Cytron MDD10A?
1 post - 1 participant
I have a 2.8-inch SPI TFT Module with PCB board dimensions of 50 x 86 mm. I want to interface this PCB to the Arduino UNO PCB with a shield like connection. The UNO PCB has dimensions smaller than the display PCB. I want to connect this 2.8-inch SPI TFT Module PCB to the shield PCB using a 14-pin socket header.
I am venturing into a more advanced layout problem. I would like to “assume” that if I use a Fritzing PCB with dimensions of 100mm long x 80mm high, and drag the Fritzing Arduino UNO part onto the larger Fritzing PCB.
Then, according to the details of my Fritzing PCB drawing
everything will fit together as shown in the attached Fritzing file.
Under these assumptions, the UNO part will locate the plated thru holes onto the proposed shield PCB.
When I design this shield PCB in this manner, I expect that the Gerber file generated will produce one PCB for the shield PCB with the PCB plated thru holes generated by the UNO PCB part and the 14-pin socket header.
Is this correct?
LCKWIKI MSP2807 Shield for Arduino_3.fzz (24.6 KB)
5 posts - 2 participants
Hey guys,
I’ve probably done something stupidly wrong here, but after quite a lot of time of debugging and unable to understand exactly what the issue was, I thought I’d ask for some proper help.
I’m trying to design a PCB, which is powered by a generic two pin header. The issue is that in the PCB view the ratsnest takes negative to positive, or vice versa, then out to the rest of the board, which breaks routing.
I’ve checked connections in breadboard view, everything looks to be okay as when I click the individual positive or negative pins, all of the correct connections light up.
We can see this in the screenshot below for J8 - I expect two seperate ratsnests out from the header, but they merge into one across the pins.
Any help would be much appreciated - many thanks
pcb_button_forum.fzz (54.7 KB)
2 posts - 2 participants
I’m new to Fritzing and just coming up to speed, and have a question. Instead of the schematic “power” symbol I’d like to use a simple arrow VCC symbol instead. Does anyone know of a simple arrow part that can be downloaded? I’ve looked in this forum and in Github, but cant find one.
Thanks,
Jack
1 post - 1 participant
Hello everybody
I am looking for the following cards:
Thanks in advance.
1 post - 1 participant
Liebe community,
Ich habe folgendes Problem:
Ich habe ein neues Bautei mit dem Bauteile- Editor bei Inkscape erstellt. Ich habe Textfelder benutzt um die Pins des neuen Bauteils zu beschriften. Hierbei habe ich die Schriftart Droid Sans benutzt, wie es empfohlen wird. Diese habe ich sogar auf der Fritzing-Website heruntergeladen. Nach dem Gestalten des Bauteils bei Inkscape habe ich es bei Fritzing hochgeladen. Dann kommt die Meldung:
“Fritzing unterstützt derzeit nur OCRA und Droid- Schriftarten–diese haben die Schriftarten in ‘C:/Users/lonsk/OneDrive/Desktop/Soundinstallation Skulpturenpark/YX5300-MP3- Player normales svg.svg’ ersetzt.”
Die svg- Datei wird zwar dann bei Fritzing hochgeladen (per Bild als Ansicht laden) aber die Größe und Position des Schriftfeldes stimmen nicht mehr. Das nervt extrem, das Programm ist so für mich unbrauchbar und ich sehne mich nach meinen alten Bleistift- Schaltplänen:D Ich will aber nicht aufgeben, weil das Erstellen der Schaltpläne mit Fritzing viele Vorteile bereit hält, denke ich.
Deshalb frage ich: Hatte jemand das selbe Problem und hat geschafft es zu beheben oder eine Idee wie das funktioneren könnte?
Außerdem würde mich noch folgendes interessieren:
Gibt es irgendwo eine Datenbank, in der man weitere Bauteile für Fritzing herunterladen kann, oder eine Datenbank mit Bildern als Ansichten von Bauteilen, die mit Inkscape erstellt wurden? Ich würde mich sehr über einen Link freuen, ich habe bisher noch nichts gefunden.
Herzliche Grüße und einen guten Rutsch ins neue Jahr!
LG Leonardo
3 posts - 2 participants
Hello,
I really do not like the potentimeter symbol as it looks more like a rheostat. In fact, this is an open issue in the part repository: Symbol of preset is wrong · Issue #306 · fritzing/fritzing-parts · GitHub
I would like to change it in the core and I have made a first attempt, but my svg has a couple of issues:
If any one could fix it, I would make a PR to change it.
Thanks!
1 post - 1 participant
I was wondering if someone has a 5.0 Bluetooth transmitter that they’ve paired with the Nox to see if it is actually APTX LL or not. I have 3 models of the Taotronics TT-Ba07, 08, and 09, none give the + sign when paired to the machine. I’m not trying to use it with the Nox, but another machine. My Q-12 earbuds when paired have the + sign. I need a transmitter to use with the Q-12’s for minimum lag. Any input or suggestions would be highly appreciated.
1 post - 1 participant
Hey everyone,
I am looking for OV7670 part and ST7789 SPI part on fritzing.
Thank you for helping
2 posts - 2 participants
