SVG Fritzing Export - FYI
@opera_night wrote: Awhile back, I did some testing of Drawing app’s - my goal is/was to avoid Inkscape and find a robust app with simple user interface. The best two (IMO) are Boxy and Gravit. By...
View ArticleRichard Bruneau parts
@ginney54 wrote: I’m a new user trying to find Omnigatherum parts but find it impossible to locate them to download. Any help would be appreciated. Greg Posts: 2 Participants: 2 Read full topic
View ArticleCustom Soldermask In Parts & Some begginer stuff
@kimkash wrote: Hi all =]’ I’ve being Investigating FZ features for some time in order to learn how to create some artistic boards I have in mind and I stuck upon some annoying issue: I’d like to...
View ArticleClik here to view.
Making edge connectors and both side smd parts
@vanepp wrote: It is possible by manual editing of the files (parts editor currently does not support this) to make parts with internal traces. One limitation is that the traces will not be solder...
View ArticleImproved Micro:bit part
@vanepp wrote: Here is an improved Micro:bit part. This one has schematic and pcb as well as breadboard. Pcb uses an edge connector (because that is how the Micro:bit connects) to connect to the pcb....
View ArticleWhich files from fritzing to submit for 3Dprinting
@BusDev wrote: Hi, Can someone tell me how to and what files from fritzing could be used or shared to order PCB for 3D printing. will gerber files work ? please suggest. Thanks Posts: 3 Participants:...
View ArticleFritzing beginner
@Petty wrote: Hi I’m a newbie Fritzing user. I have very basic questions related to schematics and using Fritzing software. Is there any hidden connection like global labels. It’s hard and confusing...
View ArticleClik here to view.
PCB (Board) Cutouts and Creating It - Simplified
@opera_night wrote: I Discovered Some ‘Magic’ regarding making the Board’s SVG Summary: A simple way to make the Board with Cutouts (and silkscreen) that appears to play well with Fritzing. I read the...
View ArticleMake the pin's name visible
@tibricole wrote: Hi, Newbie with Fritzing, I was looking for how to make the pin’s name visible on the PCB? (Just created a mystery componant, with two pins -input and output for example-, if their...
View ArticleTwo different colors for the pin's holes
@tibricole wrote: Hi, First PCB Design and the hole’s pin color makes me some troible. I’ve added a female pin header on the PCB, then duplicated it. All is right, but the hole pin’s color is note the...
View ArticleClik here to view.
SVG - Understanding The Basic's
@opera_night wrote: Posting this in it’s own ‘Post.’ For a good understanding of SVG - This Tutorial Fritzing is designed to use SVG Tiny 1.2 - This Is Specification Programs/Applications that...
View ArticleRecovering the pcb outline svg from a .fzz file
@vanepp wrote: I recently needed to recover the svg for a board outline with only the fzz file. Because the source svg is in the fzz file. Since I had to do this I figured I document how to do it for...
View ArticleHow to Add a V-Cut Line in Fritzing?
@spaceman1 wrote: Hi I am creating a PCB using the Fritzing software, and the PCB Printing service that I use (not Fritzing Fab, but something in China), enables me to add V-Cuts to the design. How do...
View ArticleFlipped capacitor (C9) on barebones arduino sample file?
@CABBAGE0896 wrote: not being an E. engineer I’m not going to say something is wrong, but it appears capacitor C9 in the sample file (breadboard view) is flipped the wrong way, can someone verify this...
View ArticleClik here to view.
Need a custom PCB with holes, notches(cut outs)
@BusDev wrote: Hello there, I spent a good amount of time trying to custom design a pcb that has holes and notches cut out. Tried with inkscape and all, following some tutorials, and have not been...
View ArticleClik here to view.
FRC parts for review
@vanepp wrote: I’m helping fix up some parts for the FRC robot folks to get them included in core parts. I’m intending on posting the fixed up parts here (as being easier than on github) so the...
View ArticleClik here to view.
Part request TO252 DPAK MOSFET
@vazquezjm wrote: I’m looking for a generic TO252 / DPAK part. Specifically for AOD4185, but a generic will work for me. Datasheet: http://aosmd.com/res/data_sheets/AOD4185.pdf...
View ArticleNew Part: PIC16F628
@NoodleDriver wrote: PIC16F628 PIC16F628_V1.fzpz (7.2 KB) PIC16F628_V2.fzpz (7.6 KB) Posts: 1 Participants: 1 Read full topic
View ArticleTiva C LaunchPad TM4C123GXL
@grumson wrote: Tiva C TM4C123G.fzpz (38.2 KB) Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
Proposed parts factory change
@vanepp wrote: I’m (slowly) working on making some fixes to the parts factory code. As part of that I intend to fix the dual row header code which is currently broken in breadboard (it doesn’t...
View Article