Clik here to view.
Circuits:LM1800 Stereo Demodulator
@MatteP wrote: LM1800 is an integrated FM stereo demodulator IC which has a number of good features integrated on it which makes it possible to design a high quality FM stereo demodulator system with...
View ArticleClik here to view.
Diodes that stand up and take only two holes like resistors
@THX1138 wrote: Resistors can be made to stand up and take only two spaces on a PCB or breadboard layout. I think this should also apply to diodes which don't have this option. 7GvwICJ.png1920x1080...
View ArticleZilog Z80 A CPU
@AlexCL wrote: Simple Z80 A CPUDip 40 Z80 A.fzpz (9.6 KB) Posts: 1 Participants: 1 Read full topic
View ArticleError in 7805 and I need at least 15 characters here
@supuflounder wrote: I placed a 7805 into my project, and the pin numbers are wrong. Can someone fix this mistake? It seems to have been first reported in January, and in the intervening ten months,...
View ArticleHow to change the distance between two strips?
@MOUS wrote: Hi! It is possible to change de distance between the strips in PCM view.In normal mode, it is 2.44mm and i would use a 1.22 mm. If yes, how ? Thanks! Posts: 1 Participants: 1 Read full...
View ArticleTwitter Saurus aus dem Creator Kit
@XGerry wrote: Hallo,Beim Processing Code zum Twittter Saurus erhalte ich folgende Fehlermeldung: The Class "Twitter" does not exist Muss ich noch eine weitere Bibliothek einfügen als die hier unten...
View ArticleRemove old ref in .fzp file
@Old_Grey wrote: <?xml version='1.0' encoding='UTF-8'?> <module referenceFile="sparkfun-connectors-50-pin-centronics-m-male.fzp"...
View ArticleOptocoupler SMD parts (and changing existing parts)
@Kajos wrote: Hi,I'm trying to add the PC817 as SMD variant. I have succesfully created the SMD alternative and Fritzing recognizes it partially (it won't give overlapping errors for the holes)....
View ArticleClik here to view.
New parts editor not available
@zhivko wrote: I cannot start new parts editor:I downloaded latest version 64bit for windows 0.9.3. Pasted image880x436 14.9 KB I am trying to create new part. Posts: 4 Participants: 3 Read full topic
View ArticleUse Mac Gestures and SpaceMouse
@josh_nelson wrote: It would be great if Fritzing was able to use inputs from a Mac trackpad. I realize that panning with the trackpad works in Fritzing, but it would also be nice if the pinch zoom...
View ArticleHelp with these parts?
@joshe91 wrote: Hello I'm very new to Fritzing and was wondering if anyone could create these parts. I tried on my own but I do not think I did it correctly. www.ti.com/lit/gpn/sn74153 I need the N...
View ArticleClik here to view.
Part Editor confusion
@lurchsum69 wrote: I am trying to create an INA125 DIP 8pic IC. For the life of me I cannot figure out how to rename to IC in the part editor. After I have made my label changes in the Metadata and...
View ArticleGerman PCB Fab with native Fritzing import support
@Libermentix wrote: Hi there, we've been around for a while producing affordable circuit boards with industry quality made in Germany and saw a lot of Fritzing-Gerber projects being ordered through...
View ArticleChange the physical size of a sliding pot
@lurchsum69 wrote: As the title suggests, in the breadboard view, how do i change the physical size of the standard sliding pot?Thanks in advance. Posts: 4 Participants: 2 Read full topic
View ArticleCreate snap point part
@Lowieke wrote: How to create a snap point in a part with illustrator.Must a add a special layer with specific name? In which view a must added? breadboard or pcb? Many thanks vfor any help Posts: 7...
View ArticleSearching parts, Velleman RX 433Mhz and SMA Connector
@cubi wrote: Hi, I'm wondering if the following parts exist:...
View ArticleNodemcu part for fritzing
@azer wrote: Hi, forgive me for my bad english. I'm looking for the part of nodemcu 0.9 devkit which seems to be larger than the 1.0. I can't find this version over the net ? Posts: 1 Participants: 1...
View ArticleArduino Mega 2560 (Rev3) std with silkscreen
@Old_Grey wrote: ATTN UPDATE - Snap to grid error. Half USB and PS plug silk missing - The std under mounted Arduino Mega 2560 (Rev3) with component silkscreen and text added to PCB view. The USB, and...
View ArticleClik here to view.
IoT Shield for Arduino
@Akshayagg009 wrote: Hello, I'm writing to let you know about 'ARMA IoT: Breakout Board for ARDUINO'. It is an IoT shield for Arduino. The board is compatible with Blynk, thingspeak libraries and it...
View ArticleClik here to view.
Motor control over internet
@nizaris wrote: Hello, I would like if possible to control 1 motor with a wemos d1 over internet or lan, mention that the engine is connected to the L298, I need to control direction and speed. i am a...
View Article