Wrong HLK-PM1 part

@loops wrote:

Hi everyone !

I've build a PCB with a HLK-PM1 part. I've the latest version of Fritzing : 0.9.3
I can't put the HLK-PM1 on the PCB, the holes are too small :(. The distance is correct, but the holes too small ... The diameter of the pin is 0.8 mm and in the PCB i've something like 0.5 mm

I've tried to modify the HLK-PM1 part but without success !!!

Somebody can help me ???

Thanks a lot !

JC

Posts: 3

Participants: 2

Read full topic